Products
-
PCR
Passenger Car Tyre
-
INNER TUBE
Inner tube is a ring-shaped elastic tube with a tire valve used to maintain the internal pressure of the tire. The valve is used to inflate and maintain a certain pressure in the inner tube. The inner tube shall have good air tightness, heat resistance, elasticity, aging resistance and small permanent deformation.
Inner tube is an air bearing container for inflation and damping. It is used as an auxiliary air bearing container in the inner cavity of truck, motorcycle, bicycle and rickshaw tires. It can be divided into natural rubber inner tube and butyl rubber inner tube according to the main materials.
-
-
Special Rubber Hose Assembly of Coal Hydraulic Stand
Type K1 Joint Applied to hydraulic support equipment.
Technical Standard: Ministry of Coal Industry MT98-84
Type K2 Joint
Applied to the general mining equipment of Britain, France and other European countries. -
FLAP
Flap is installed between the inner tube and the rim, the middle part is thicker, and the two edges are thinner from inside to outside. There is a center line on the outer surface of the flap for the main line during installation. There is also a hole on the center line for the inner fetal air valve mouth to pass through. The backing tape does not require high physical and mechanical properties of the rubber, but it should have good aging resistance. Tubeless tires fixed to deep rims and ultra-low pressure tires fixed to rims with special structures do not need falp due to tight fitting.
-
Marine High Pressure Oil-conveying Rubber Hose
CONSTRUCTION：Steel wire spiraled reinforced layer, wearing resistant synthetic rubber cover.
APPLICATIONS： For carrying natural gas, petroleum, etc. on sea oor.
-
Boring Self-styled Sealing-JZF Ⅱ
Application:
It is used in coal or rock in grouting, water injection and subsequent blocking.
Construction:
The sealing is consisted by expansion high-pressure hose, safety valve, quick joints, steel pipe skeleton and so on. -
Anti aming Fire-resistance Rubber Hose
CONSTRUCTION：
High pressure steel wire spiraled rubber hose, covered with re resistant paint coat, steel wire braided layer, and antiamig layer.
APPLICATIONS：
It is mainly used in high temperature surroundings and in conditions having heat source or heat radiation source, such as oil eld well-control, metal smelts, and chemical industry. -
Resin Hose Series
PA,PA-11,PA-12 nylon hose is abrasion-resisting and flexible, many materials which make other hose out of work have no effect on the product.
PA, PA-11, PA-12 nylon hose has smooth intine, with fluent liquid flow and without stain and fouling. -
Oxygen Blowing Hose
APPLICATIONS：
Used to carry oxygen for steel-making equipment.
FEATURE：
1.The rubber has good property of anti-oxygen and hot-resistance.
2.Bearing high pressure, only small distortion of hose body under pressure.
3.Perfect in anti-stretching, bending resistance and fatigue resistance.
4.Metal tting have good seal.
-
Impact Bar
Combination of UHMW and elastic rubber. Outstanding sliding properties of UHMW polyethylene surface ensure the belt run smoothly, highly wear- resistant rubber absorb and dramatically reduce the shock and friction of the loading material to the belt.
-
Diamond Strip Lagging Rubber
Grooved rubber lagging used for drive pulleys of low to medium loaded conveyor belt, reduce slippage between belt and pulley, improve and stabilize coefficient of friction, prevent the pulley against wear and corrosion, strong adhesive system with CN bonding layer.
-
Rubber Screw Belt Fastener
Conveyor belt fasteners for efficient repair in all conditions.
-
-
Conveyor Belts Joint Vulcanizing Presses
Used for the heating vulcanization of joint connection and reparation of fabric ply conveyor belt, steel cord conveyor belt, PVC PVG solid woven fire- resistant conveyor belts.